Dabonn Boiler supplied a customized 1.4 MW oil hot water boiler for an HFO fuel farm project, with the system designed around HFO 180 fuel and the customer’s specific site requirements. The project required more than a standard oil boiler because the fuel type, hot water capacity, operating conditions, and project drawings all had to be considered before manufacturing.
This case shows how an industrial oil hot water boiler can be customized for a fuel farm application where reliable heat supply is required and the available fuel is heavy fuel oil.
The Project Challenge: Why Was a Standard Oil Boiler Not Enough?
Fuel farm projects can have very different requirements from ordinary factory heating applications. The customer may already have a specific fuel available on site, while the heating system needs to operate reliably for long periods under industrial conditions.
In this project, the customer required a 1.4 MW oil hot water boiler for an HFO fuel farm. The selected fuel was HFO 180, which meant that the boiler system had to be designed around the characteristics of heavy fuel oil rather than simply using a standard diesel burner configuration.
The customer also required customized technical drawings before production. Therefore, the project involved both boiler manufacturing and technical design work.
What Boiler Did Dabonn Supply?
| Project Parameter | Project Information |
|---|---|
| Boiler type | Oil-fired hot water boiler |
| Thermal capacity | 1.4 MW |
| Fuel | HFO 180 |
| Application | HFO fuel farm |
| Project requirement | Customized design and drawings |
| Equipment value | Approximately USD 28,000 |
The approximately USD 28,000 equipment value refers to the project information available for this case. The final project cost can vary depending on the equipment scope, transportation, installation, auxiliary systems, and local project requirements.
Why Was HFO 180 Important in This Project?
Heavy fuel oil is different from diesel or light oil in terms of fuel handling. Its higher viscosity can require additional fuel preparation and heating before stable combustion can be achieved.
For an HFO-fired boiler, the burner and fuel system therefore need to be considered together. The fuel supply arrangement can include heating, filtration, pumping, and other components depending on the actual fuel specification and site conditions.
For this project, the fuel was confirmed as HFO 180 before the boiler configuration was finalized.
How Was the Boiler Customized?
The customer provided project requirements that could not simply be handled by selecting a standard catalogue model. Dabonn prepared customized drawings based on the required thermal capacity and project conditions.
The customization process focused on several key points:
- 1.4 MW thermal output
- HFO 180 fuel characteristics
- Oil burner configuration
- Fuel supply requirements
- Hot water system requirements
- Boiler connection arrangement
- Project-specific technical drawings
- Installation and operating conditions
This approach is important for industrial boiler projects because the boiler itself is only one part of the complete heating system.
Why Choose an Oil Hot Water Boiler for a Fuel Farm?
A hot water boiler is useful when the process requires hot water or a circulating hot water heating system rather than steam.
Compared with a steam system, a hot water boiler can provide heat through a circulating water loop. This can be suitable for industrial heating applications where the process does not require direct steam.
For a fuel farm, the heating requirement may be related to maintaining the required temperature of fuel or supporting other thermal processes. The exact application depends on the design of the fuel storage and handling system.
What Was the Main Value of This Dabonn Project?
The most important part of this project was not simply the 1.4 MW capacity. It was the combination of capacity + HFO 180 fuel + customized drawings + industrial application.
These details gave Dabonn the information needed to configure the boiler around the customer’s actual project instead of supplying a generic oil boiler.
This is also an important consideration for customers comparing industrial boiler suppliers. A supplier should understand the relationship between the boiler, burner, fuel system, hot water circulation system, and actual application.
About Dabonn Boiler
Dabonn Boiler is an industrial boiler manufacturer and power plant project integration supplier with more than 30 years of boiler manufacturing experience.
Dabonn provides industrial boiler solutions for customers in more than 130 countries and regions and has served more than 10,000 industrial boiler customers.
| Dabonn Boiler | Information |
|---|---|
| Manufacturing experience | 30+ years |
| Countries and regions served | 130+ |
| Industrial boiler customers | 10,000+ |
| Main products | Oil, gas, biomass, coal and other industrial boilers |
| Applications | Industrial heating, steam, hot water and process applications |
What Can Customers Learn From This HFO Boiler Project?
This project demonstrates several practical points for customers planning an oil-fired hot water boiler project.
- Confirm the fuel before selecting the burner.
- Do not treat heavy fuel oil like diesel.
- Provide the required thermal capacity clearly.
- Share site and connection requirements before manufacturing.
- Request technical drawings when the project requires customized connections.
- Consider the complete fuel system instead of looking only at the boiler body.
Frequently Asked Questions
What capacity was the Dabonn oil hot water boiler for the fuel farm?
The boiler supplied for this project had a thermal capacity of 1.4 MW.
What fuel did the boiler use?
The project used HFO 180, a heavy fuel oil specification.
How much was the 1.4 MW oil hot water boiler?
The equipment value recorded for this project was approximately USD 28,000. The final project cost can vary according to equipment scope, transportation, installation, and auxiliary systems.
Why does an HFO boiler need special consideration?
Heavy fuel oil has different handling characteristics from diesel and light oil. Depending on the fuel specification, the system may require fuel heating, filtration, pumping, and a suitable burner configuration.
Can Dabonn customize an oil hot water boiler?
Yes. Dabonn can develop the boiler configuration and technical drawings according to thermal capacity, fuel type, operating requirements, and project conditions.
What is the difference between an oil hot water boiler and an oil steam boiler?
An oil hot water boiler heats circulating water, while an oil steam boiler produces steam. The correct choice depends on whether the industrial process requires hot water or steam.
Is a 1.4 MW boiler suitable for every fuel farm?
No. Boiler capacity should be determined from the actual heat demand of the fuel farm and its heating system. A 1.4 MW boiler is suitable for the requirements of this particular project, but another fuel farm may require a different capacity.
What information should be provided for an HFO boiler quotation?
Important information includes required thermal capacity, HFO specification, operating temperature, hot water supply and return temperature, operating hours, fuel system requirements, site conditions, and local regulations.
Conclusion
This 1.4 MW HFO hot water boiler project shows why industrial oil boiler projects should be designed around the actual fuel and application rather than selected only by capacity.
For this fuel farm project, Dabonn supplied a customized solution using HFO 180 fuel, with an equipment value of approximately USD 28,000 and project-specific technical drawings.
If your project uses heavy fuel oil and requires industrial hot water, the most useful starting information is the required thermal capacity, HFO specification, water temperature, operating hours, and site conditions.